Skip to content

NORMA

NORMA — a plugin for Revit

Checks your model against Uzbek building codes (ШНҚ) and speeds up work with rooms, finishes, doors and windows, and schedules.

Download Plans and pricing

Revit 2024–2027, Windows · latest version v1.37.1

Example: NORMA found two issues on an apartment plan Living room 18,4 m² Bedroom 2,25 × 4,10 Kitchen 7,2 m² Hall Bathroom

Bedroom width 2.25 m — must be at least 2.4 m ШНҚ 2.08.01-24, 36-band

Kitchen 7.2 m² — at least 8 m² in apartments with two or more rooms ШНҚ 2.08.01-24, 35-band

What it does

NORMA uses the data in your model to speed up design work and catch mistakes. When a value was entered wrongly, the plugin corrects it and always tells you so.

Tools

  • Check model — room areas, widths and heights, apartments, stairs and lifts against ШНҚ 2.08.01-24. Every issue shows the clause.
  • Rooms — room names, levels, numbering, blocks, apartment schedules and room schedules.
  • Finishes — finish modelling, finish library, quantities and schedules.
  • Walls and openings — opening areas, door and window schedules, swing side.
  • Dimensions — room and facade dimensions.

How it works with your model

  • Uses only Revit’s built-in parameters and its own NORMA_ parameters — it never touches parameters from other templates.
  • Does not break Model Groups.
  • Interface in Uzbek and Russian.

Requirements

  • Windows; Revit 2024, 2025, 2026 or 2027.
  • Internet for registration and licence checks. Works offline for up to 7 days.

Tools

Every panel and tool on the Revit ribbon: what it does, how to use it, which parameters receive the result and which code it is based on.

NORMA is currently in testing: the tools are being tried on real projects and refined based on user feedback. Every change is listed under “Versions”.

Code — ШНҚ check Checking the model against code requirements and preparing data for the check.

Check model

Trial and Pro

Checks the Revit model against ШНҚ 2.08.01-24 (residential buildings) and selected clauses of ШНҚ 2.01.02-04 (fire safety). Every result shows the code clause.

Details
What it does
  • Rooms: area, width and height. Width is measured between walls — including rooms with slanted and curved walls.
  • Apartments and bathrooms: requirements by apartment type; the bathroom type is detected from plumbing fixtures (toilet, bath or shower, washbasin).
  • Lifts and stairs: number of lifts and cab size, flight width and slope, landings, guard height, stairwell window.
  • Fire height and emergency exits.
  • “Model readiness”: what the model is missing for the check — room names, floor types, apartment numbers and so on.
How to use it
  1. In the “Floors” window, set floor types and typical floors.
  2. Click “Check model” — the results appear in the NORMA panel.
  3. Select a result — Revit shows that room. Rooms with errors are coloured red, apartments orange.
  4. If needed, exclude a result with a reason, print the report or save it to CSV.
Where the result is written
  • Panel tabs: Results · Building summary · Model readiness · Info. Sections: Architecture, Fire safety, Model readiness.
  • HTML report (print → PDF) and CSV. Each clause has “Read the clause on the website” — the code text on the BIMFAB website.

Code: ШНҚ 2.08.01-24 (with amendments 01/2-2 of 21.01.2026 and 01/2-13 of 06.04.2026); ШНҚ 2.01.02-04 — 5.18, 5.34, 5.35, 5.37, 5.38, 5.40, 6.19¹, 7.10.

#

Room names

Trial and Pro

The check detects the room type (bedroom, kitchen, bathroom and so on) from its name — this window is where you work with the model’s room names.

#

Floors

Trial and Pro

Building level data for the check.

Details
What it does
  • The type of each level: basement, residential floor, technical floor and others.
  • Typical floor group.
  • Fire engine access level and top-floor windows — for calculating fire height.
  • Fixing level names by a tag or a template — in Uzbek, Russian and English.
#

Apartment mix

Trial and Pro

List of apartments: number of rooms, total and living area.

Details
What it does
  • Apartments are detected from the plan: rooms connected by doors and room separation lines form one apartment.
  • Common areas (entrance hall, lift lobby, stairs) are not part of an apartment.
#

Rooms Numbering, blocks, apartment mix and room schedule.

Blocks

Trial and Pro

You mark the boundaries of building blocks (sections) on the plan — the block name is written to the rooms automatically.

Details
What it does
  • Block outlines are stored in the model.
  • The block is also written to new rooms drawn later.
Where the result is written
  • NORMA_Блок
#

Numbering

Trial and Pro

Room numberingApartment numbering

Room and apartment numbers — automatically or in the order you click.

Details
What it does
  • Rooms: by floor or within each apartment, in order of position; or by clicking rooms one after another.
  • Apartments: detected from the plan and numbered; common-area rooms get “Места общего пользования”.
  • Finds duplicate numbers and offers to renumber the floor with one button.
Where the result is written
  • Revit “Номер” (Number), NORMA_Номер квартиры
#

Room schedule

Trial and Pro

Room schedule table: grouped by apartment, common areas at the end.

Details
What it does
  • A table for each floor or typical floor group.
  • Columns 20-80-20 mm, NORMA_ISOCPEUR text types.
  • When run again, the table is updated in place.
Where the result is written
  • In the Revit project browser — the “NORMA 1. Экспликация помещений” section.
#

Write apartment data

Trial and Pro

Writes apartment data to rooms and colours the apartments.

Details
What it does
  • Apartment number, number of rooms, apartment areas (total, living and with coefficients).
  • Area coefficient for balconies, loggias and glazed summer rooms.
  • Room order: non-living rooms first, then living rooms.
  • “NORMA — Квартиры” colour scheme: each apartment gets its own light colour, common areas are grey.
  • If a room name has a typo, it suggests the correct name used in the project.
Where the result is written
  • NORMA_Номер квартиры, NORMA_Количество комнат, NORMA_Площадь квартиры, NORMA_Площадь квартиры жилая, NORMA_Площадь квартиры общая, NORMA_Порядок помещения
#

Write room size

Trial and Pro

Writes the room’s width and length to its parameters — for display in the room tag.

Details
What it does
  • In rooms with steps or slanted walls, the narrowest point is reported separately.
#

Clean up rooms

Trial and Pro

Finds and deletes invalid rooms (not placed or not enclosed).

Details
What it does
  • What was deleted is listed by reason in the results window.
#

Dimensions

Free

Room dimensionsFacade dimensions

Places dimension strings on the plan automatically.

Details
What it does
  • Room dimensions: width and length of each room, strings along walls with doors and windows — from the finished wall surface; also with walls and columns of a linked structural (KJ) model.
  • Numbers do not overlap each other or the room tag — if there is no space, they move to the other side of the line.
  • Facade dimensions: around the building on 4 sides, 1 to 4 rows; the first row covers openings and building corners.
How to use it
  1. Open a floor plan.
  2. Select rooms (or the whole view) and click “Room dimensions”; for the facade, choose the sides and the number of rows.
  3. Dimensions that could not be placed are shown in the results window with a reason.
#

Finishes Interior finish modelling, quantities and ГОСТ schedules.

Model finishes

Trial and Pro

AllWallsFloorsCeilingsReveals

Models room finishes with Revit elements: walls, floor, ceiling, skirting and reveals.

Details
What it does
  • Wall finish by substrate: brick and blocks, aerated block, cast-in-place concrete, plasterboard, columns — each with its own type; lower wall zone and the space above the suspended ceiling.
  • The floor is built from the top of the slab, under a door — up to the door leaf; also on balconies and loggias; in stairwells — only on landings.
  • Ceiling: painted slab soffit or suspended ceiling; beam soffits and sides separately; stair soffits too.
  • Reveals: windows and exterior doors; for interior doors — in the rooms you choose (for example, tiles on the bathroom side).
  • Skirting stops at doors and follows the steps on stairs.
  • In bathrooms, the finish of different walls on one line is brought into a single plane.
  • Typical floors: one floor is modelled and copied to the others. Model Groups are not touched.
How to use it
  1. Select rooms or set the scope: current floor, typical group or the whole building.
  2. For each room group, choose the types (★ — NORMA library, or project types) and the ceiling method.
  3. “Model” — the progress window shows the stages and remaining time; press Esc to cancel.
  4. The result is undone with a single Ctrl+Z.
Where the result is written
  • Each element gets NORMA_Номер помещения and NORMA_Элемент отделки. The plugin marks the elements it creates: re-modelling replaces only those, manually drawn ones are left alone.
#

Select finishes

Trial and Pro

Selects or deletes the finish elements created by the plugin.

Details
What it does
  • By category (walls, floor, ceiling, skirting, reveals, plaster) and by scope: current floor, view or selected rooms.
#

Update

Trial and Pro

One button after the model changes: finishes are re-modelled, quantities recalculated and schedules updated.

Details
What it does
  • Copies on typical floors are updated too.
  • If you deleted part of a finish by hand, it asks in a window: model it again or leave it as is.
#

Finish quantities

Trial and Pro

Calculates finish areas for each room and writes them to the rooms.

Details
What it does
  • Ceiling, walls, lower wall zone, columns, reveals, space above the ceiling (area and volume), floor and skirting length.
  • Quantities from the model (if finishes are modelled) or from rooms and openings — chosen automatically for each category.
  • Confirmation window: room types, wall substrates, warnings — for example, a non-water-resistant finish in a wet room or a ceiling type that does not match the method — with an “Apply recommendation” button.
  • Input check: if a value was entered wrongly, it suggests the correct option.
Where the result is written
  • NORMA_Отделка_… (schedule texts), NORMA_Площадь стен, NORMA_Площадь потолка, NORMA_Площадь пола, NORMA_Длина плинтуса, NORMA_Объем запотолочного пространства

Code: ШНҚ 2.01.08-24, clauses 50–51 — the rule for plastering walls above the suspended ceiling (selectable in the window).

#

Finish schedules

Trial and Pro

Per ГОСТ 21.501-2018: Form 1 “Ведомость отделки помещений” (room finish schedule) and Form 4 “Экспликация полов” (floor schedule).

Details
What it does
  • For each floor, a typical group (per floor or as a group total) or the whole building.
  • Schedule layout window: turn columns and rows on or off; the plugin recommends per ГОСТ (★).
  • Several finishes in one cell — each on a new line, with its area opposite.
  • When run again, the schedules are updated in place.

Code: ГОСТ 21.501-2018, Annex A (Form 1, Form 4).

#

Finish library

Trial and Pro

Ready-made finish types: walls, floor, ceiling, columns, beams, space above the ceiling and skirting.

Details
What it does
  • More than 20 types: walls Ст-1…Ст-8 (plaster and paint, tiles, plasterboard, concrete and more), floors 1–7, ceilings Пт-1…Пт-5.
  • Standards for 9 room groups: living, kitchen, entrance, hall, utility, summer rooms, common areas, technical and other.
  • Edit layers and materials, export and import JSON, create the types in the project.
  • Layer thicknesses are typical values — adjust them to your own practice.

Code: ГОСТ 21.501-2018 (Forms 1, 4); ШНҚ 2.01.02-04, 5.25 (finish materials on escape routes).

#

Link to room

Trial and Pro

Writes the room number to manually drawn finish elements (walls, floors, ceilings) so the quantities include them too.

Details
What it does
  • If an element covers several rooms it is not linked — it is listed separately in the results window.
#

Walls and openings Wall tools, openings, doors and a ГОСТ schedule.

Walls

Trial and Pro

Disallow joinSplit by levelsWall parameter → opening

Common wall operations.

Details
What it does
  • Disallow join — turns off the joins at the ends of the selected walls.
  • Split by levels — splits multi-storey walls and columns at the levels.
  • Wall parameter → opening — copies a wall parameter value to its doors and windows (you type the parameter names).
#

Opening areas

Trial and Pro

Writes the door and window opening area to each room and opens a window for confirming opening sizes.

Details
What it does
  • The opening size is measured from the hole in the wall; the suggestion is rounded to 100 mm steps.
  • Overlapping openings facing two rooms are counted once.
  • The confirmed size is also written to doors and windows inside Model Groups — the group is not broken.
Where the result is written
  • NORMA_Проём подтверждённый, NORMA_Ширина проема, NORMA_Высота проема
#

Door swing

Trial and Pro

Detects whether a door opens left or right, and inward or outward.

Details
What it does
  • From the door symbol on the plan (leaf line and arc), otherwise from a family sample.
  • Left/right per ГОСТ 475-2016, 3.10: which side the hinges are on when viewed from the opening side.
  • Undetermined doors are listed with a reason.
#

Mirrored elements

Trial and Pro

Finds mirrored doors, windows and other elements — listed by category.

#

Door and window schedule

Trial and Pro

Door and window schedule per ГОСТ 21.501-2018 — with quantities by floor.

Details
What it does
  • Position, designation (Обозначение), name (Наименование), quantity, mass and note (opening size).
  • Designation and name are filled automatically from the rooms on each side of the door and its material — ГОСТ 475, 31173, 23747, 30674 templates.
  • ГОСТ-style marks: ДМ-1, ДВ-2, ОК1. Left- and right-hand doors get separate rows.
  • The opening size is measured from the hole in the wall and confirmed.
  • Lift doors and openings without doors are left out of the table (you can add them). Typical floors share one column.
Where the result is written
  • Values are written to the doors and windows themselves (without editing groups), the position to “Марка” (Mark). In the Revit browser — “NORMA 4. Спецификация элементов заполнения проемов”.

Code: ГОСТ 21.501-2018, 5.3.7; ГОСТ 21.101 (forms 7/8); ГОСТ 475-2016, ГОСТ 31173-2016, ГОСТ 23747-2015, ГОСТ 30674-99.

#

Schedules All schedules in one place.

Schedules panel

Trial and Pro

Room scheduleFinish schedulesApartment mixDoor and window schedule

The tools that create schedules are also on a separate panel.

Details
What it does
  • NORMA schedules are not mixed in the Revit project browser — each type is in its own section: “NORMA 1. Экспликация помещений” … “NORMA 4. Спецификация элементов заполнения проемов”.
#

NORMA Parameters, language, license.

NORMA parameters

Trial and Pro

Adds the plugin parameters (NORMA_) to the project and shows them in one table.

Details
What it does
  • Parameters have a fixed GUID — the same on every computer and in every project.
  • One-time copy: old ADSK_ values into NORMA_.
  • Safe clean-up of ADSK_ values: family dimensions and formula-driven parameters are left alone; optionally the project parameter can be removed entirely.
#

Language

Everyone

Interface language: Uzbek or Russian.

#

License

Everyone

Registration, trial and Pro status.

Details
What it does
  • Registration: first name, last name, phone, email, profession, city; a confirmation code arrives by email.
  • The 7-day trial starts right away — once, on one computer.
  • Pro — on 2 computers (in a company subscription each employee uses their own email on 1 computer). Works offline for up to 7 days.
#

About

Everyone

Version, author and contacts.

#

Plans

You sign up inside the plugin; a confirmation code is sent to your email.

Free

0 UZS

  • Dimensions: room and facade dimensions
  • Keeps working after the trial ends

Trial — 7 days

0 UZS

  • All tools and “Check model”
  • Check reports (HTML, PDF conclusion, Excel) — Pro only
  • Once per computer

Pro

120 000 UZS / 1 month 340 000 UZS / 3 months 6 % cheaper than monthly 650 000 UZS / 6 months 10 % cheaper than monthly 1 150 000 UZS / 1 year 20 % cheaper than monthly

  • All tools, including “Check model” (ШНҚ 2.08.01-24)
  • Check reports: HTML, PDF conclusion, Excel
  • Personal Pro — on 2 computers (office and home)
  • Free for 3 months for course students

Message on Telegram How to buy

What works on each plan
ToolsWithout registrationFreeTrial — 7 daysPro
About, Language, License✓✓✓✓
Dimensions: rooms and facade—✓✓✓
Rooms, Finishes, Walls and openings, Schedules, NORMA parameters——✓✓
Check model (ШНҚ)——✓✓
Check reports: HTML, PDF conclusion, Excel———✓
Term—unlimited7 days, oncesubscription
Computers—112

For organizations

Corporate subscription

Pro for every employee of your design firm — one request, one payment. See the calculation here, print a commercial offer or send the link to your manager.

  • 1 seat — 1 employee with their own email, on 1 computer
  • Employee list Pro is issued to their emails
  • Commercial offer in one click — PDF or paper
  • Contract and bank transfer — coming soon

Calculation

works on 5 computers

Term
—
—
—
Total
—

Contract request

How to buy

  1. Download and install

    One installer for Revit 2024, 2025, 2026 and 2027.

  2. Register

    In the plugin’s “License” window: a code arrives by email and the 7-day trial starts.

  3. Pay

    For now — a bank card transfer: write to us on Telegram (@Blackhawk997) or leave an organization request and we will send the payment details.

  4. Pro is activated

    Once the payment is confirmed, Pro is added to your account — no key to enter: the plugin checks with the server and the “License” window shows Pro.

Bank card transfer

Now

Payme · Click

Coming soon — Pro activates automatically after payment

Organizations: contract and bank transfer

Coming soon

Versions

Every version was released based on user testing. Newest first.

  1. v1.37.1 18.11.2026

    Yangi: «Statistikam» — o'z ish vaqtingiz: bugun, hafta, oy; qaysi loyihada qancha ishlaganingiz; Excel'ga chiqarish. Ma'lumot faqat shu kompyuterda saqlanadi, hech qayerga yuborilmaydi. Harakatsizlik aniqroq: Revit 30 soniyadan ko'p orqada tursa yoki Revit oldinda 1 daqiqa sichqoncha/klaviatura ishlatilmasa — «harakatsiz». Pulse: Revit'dan qisqa chiqishlar ham hisobga olinadi.

  2. v1.36.6 14.11.2026

    Joriy litsenziyada yopiq vositalar lentada xira ko‘rinadi: bosilsa, nima kerakligi tushuntiriladi.

  3. v1.36.5 12.11.2026

    «Modelni tekshirish» endi bepul sinovda ham ishlaydi (hisobotlar — Pro tarifda). Litsenziyasiz vosita bosilganda chiqadigan xato tuzatildi: endi tushuntirish oynasi ochiladi.

  4. v1.36.4 12.11.2026

    «Modelni tekshirish» endi bepul sinovda ham ishlaydi (hisobotlar — Pro tarifda).

  5. v1.36.3 12.11.2026

    Server bilan aloqa xatolari endi sababini ko'rsatadi.

  6. v1.36.2 11.11.2026

    Revit 2027: plagin ishga tushmasligi tuzatildi.

  7. v1.36.1 11.11.2026

    Yangi: «Xulosa (PDF)» — rasmiy ko'rinishdagi tekshiruv xulosasi; natijalar va kvartirografiya Excel (.xlsx) ga saqlanadi. Eksplikatsiya: kvartirasiz qavatlar (do'kon, yerto'la) uchun ham jadval — «Xonasi bor barcha qavatlar». Bloklar: «Butun bino» belgisi; o'chirilgan blok yozuvi xonalardan tozalanadi. Tekshiruv: eni o'lchanmagan marsh endi xato emas — «Tekshirilmadi». Pardoz hisobi: pardoz modellanmagan xonalar haqida ogohlantirish. Litsenziya holati tezroq yangilanadi.

  8. v1.35.0 09.11.2026

    Choose Revit versions during installation. A Welcome window and “Having a problem? Write to us” — the message goes straight to the developer. Stronger licence and update protection; the trial length now comes from the website.

  9. v1.34.0 09.11.2026

    NORMA_ values are also written to the matching ADSK_ parameters in the model — for families that work with ADSK_ (can be turned off in settings).

  10. v1.33 01.11.2026

    BIMFab Pulse — work statistics for companies; updating from inside the plugin; a new licence window.

  11. v1.32.1 29.10.2026

    In the results panel, every code result has “Read the clause on the website” — it opens the clause page on the BIMFAB website; also in the HTML report.

  12. v1.32.0 26.10.2026

    Registration and licensing: 3-day trial, Pro on 2 computers. One installer for Revit 2024, 2025, 2026 and 2027.

  13. v1.30 25–26.10.2026

    Schedule: lift doors and openings without doors are left out, balcony doors follow ГОСТ 30674 (БП), one product in different openings gets a letter (ДВ-3а). Apartment order in the room schedule fixed.

  14. v1.29 25.10.2026

    NORMA parameters can vary between Model Group instances — groups are not broken. Opening size suggestion (100 mm step); overlapping openings are counted once. If Revit rejects a change, it is cancelled with the reason shown.

  15. v1.28 24.10.2026

    “NORMA — Квартиры” colour scheme: each apartment in its own colour, common areas grey.

  16. v1.27 24.10.2026

    The plugin works only with Revit’s built-in parameters and NORMA_ parameters. One-time copy of ADSK_ values and their safe clean-up.

  17. v1.25–1.26 22–24.10.2026

    Door and window schedule (ГОСТ 21.501-2018): automatic designation and name, ГОСТ marks, door swing from the plan symbol, opening from the hole in the wall, left and right in separate rows.

  18. v1.24 21–22.10.2026

    Results of all tools in one window; lists are no longer truncated.

  19. v1.23 18–21.10.2026

    Typical floors (finish copies and schedules), progress window (cancel with Esc), apartments detected from the plan, input checks, “Select finishes”.

  20. v1.21–1.22 16–18.10.2026

    Reveal modelling; choosing the rooms that get reveals.

  21. v1.20 13–16.10.2026

    Interior finishes: modelling, library, quantities, ГОСТ 21.501 Form 1 and Form 4; stairwell finishes.

  22. v1.19 12.10.2026

    Room and facade dimensions.

  23. v1.15–1.18 05–12.10.2026

    “AR · Architecture” section: apartment mix, numbering, room schedule, blocks, openings, door swing, NORMA parameters; installer (Setup) and HTML report.

  24. v1.0–1.14

    ШНҚ 2.08.01-24 check: rooms, apartments, bathrooms, lifts and stairs, fire height. 1.14 — fixes after the first test on a real project (a 12-storey residential building).

FAQ

Which Revit versions are supported?

Revit 2024, 2025, 2026 and 2027 on Windows. There is one installer: it finds the Revit versions on the computer and you choose which ones to add the plugin to.

Do I need internet access?

Yes, for registration and license checks. It works offline for up to 7 days.

On how many computers can I use it?

Personal Pro — on 2 computers (office and home). In a company subscription each seat is one employee with their own email, on 1 computer. The trial — once, on one computer.

What happens after the trial?

Dimensions (rooms and facade) keep working for free. The other tools need Pro.

Does it work with ADSK or other template parameters?

The plugin works only with Revit’s own built-in parameters and its own NORMA_ parameters. Old ADSK_ values can be copied once into NORMA_ in the “NORMA parameters” window.

Does it break Model Groups?

No. Values are written to group members without editing the group; if an action would break a group, the plugin skips it and shows it in the results window.

Which codes is it based on?

ШНҚ 2.08.01-24 (with amendments) and selected clauses of ШНҚ 2.01.02-04; schedules follow ГОСТ 21.501-2018. The link next to each result opens the code text on the BIMFAB website.

Found a bug or have a suggestion?

Write to us on Telegram, with a screenshot if possible. Each version is fixed based on user testing.

For course students?

Course students get Pro free for 3 months.

Which clauses are checked automatically?

Currently 28 clauses — listed below; click any of them to read the code text. The remaining clauses are not checked automatically — a specialist reviews them manually. The “compliance percentage” in the plugin is also calculated only for these clauses. New clauses are added version by version.

ШНҚ 2.08.01-24 (20): 34, 35, 36, 38, 39, 40, 43, 44, 46, 47, 171, 178, 179, 180, 190, 196, 222, 226, 229, 230

ШНҚ 2.01.02-04 (8): 5.18, 5.34, 5.35, 5.37, 5.38, 5.40, 6.19¹, 7.10

We accept

UzcardHumoVisaMastercard

Payment takes place on the payment system’s protected page and is confirmed with 3D Secure. Card details are not stored on our site.